Вы не вошли. Пожалуйста, войдите или зарегистрируйтесь.
Hi Baltika
Thank u for ur guidance. However, have not been able to reach the correct person to get the right configrator.
Can some help me find it on the internet some where? OR it is a compulsion to get it from where I bought the device?
Hi pervaizbutt,
You will not find on internet, give me a PM or Skype and I will handover to you
My Skype: hsrutgers
regards
""Baltika""
if you know your Firmware version , I can send it to you. Or try to find the firmware updater in your zip file.
Regards
EQ
Hi,
I don''t need, I have all ..
thks
Regards
Baltika
i think it would be much more easier just to flash latest FW and than use the correct configurator ;-)
But harms, the x.8.x firmware, what special functions does it has?
Wolf.
Hi Wolf,
We have the best experience with the 10 version ... we use this for the FM11xx series ..
It solves the GPS problems as you can have with the other/older versions.
regards
Baltika
Hi Harm,
yes, we also use it and its perfect.
missed you at the cebit!
Wolf.
Can somebody help me in configuring FM1100 output, Am using Output 1 for engine cut off
Need instruction for hardware configuration and setting commands in wialon
Hi Orosgroup,
Contact me in Skype: hsrutgers (txt-chat)
I have all instructions<>drawings on my hand
regards
Baltika
by the way, as i remember not every firmware supports tcpip bases commands on fm11!
Wolf.
Hi Wolf,
True !! 
regards
Baltika
Hi guys,
after becoming a customer of swedish TELE2 M2M unit i am wondering how to configure the FMxx series from Teltonika in a correct way...
If i want to use it in germany, country code is 262 and networks 01,02,03,07. But Homenetwork is Sweden?
So what would i configure ?
Thanks for Ideas
Wolf
Wolf, I have one idea - you can get in contact with our partner in Sweden (the guy I wanted you to meet at CeBIT but you were at our booth at different days). Just ping me on Skype and I will send you his contact info to see if Dean will be able to help.
Hi guys,
after becoming a customer of swedish TELE2 M2M unit i am wondering how to configure the FMxx series from Teltonika in a correct way...
If i want to use it in germany, country code is 262 and networks 01,02,03,07. But Homenetwork is Sweden?So what would i configure ?
Thanks for Ideas
Wolf
If you use a sim card of a Swedish operator you must indicate this very same operator network number.
If you use a sim card of a German operator you must indicate this very same operator network number.
I.e. you must indicate the number of the network of the gsm provider that you use.
Hello,
could someone please send me working firmware for FM1100? Recently we are having problems with GPS connection lost. Communication with Sales representatives from Teltonika company is too difficult and they always send us firmware with errors.
Thank you
Hi mimicar
haha YEP !!! Contact me on Skype pls : hsrutgers
regards
Baltika
Hi , I'm sending commands ( set param 1245 *adresseip* )within GPRS The device send me "ping" as result.
Can anyone help me to fix the problem.
did you try to send other commands? does that work?
not all fm11 fimware is able to receive commands via gprs!
The command you wrote is ok and should work.
Wolf.
Hi
Greetings from TZ.kindly can you send me a configurator for teltonica fm 1202
Hi,
We have purchased Teltonika FM 1120 and connected temperature sensor DS18B20 by taking middle pin as an input to the device and not given any external power to DS18B20 (Parasitic mode).Am not receiving any data from the device to the platform and I have selected "param72" in the sensor setting.Any advice guyyss
You must connect two other pins to GROUND, not to leave it open.
Hi
I need firmware for Teltonika FM4200 that supports garmin .
please send me at marouen.baklouti@gmail.com
Please help and thank you in advance for you replies and effort.
Hello,
I would like to ask you concerning problem with GPS connection of FM1100. Recently offen happen that some of FM1100 suddenly lost GPS connection and then after some time the connection is back ON. For example: Tracker have locked 17 satellites and work OK, car is driving on highway and suddenly the number of satellites is 0. We already tried to change the firmware (thanks to "Baltika" ), but the problem still remain. We have this problem with trackers bought after December 2014. Does anyone have similar problem with trackers Teltonika FM1100?
Thank you for any answer or help.
Michal
Hi Michal,
Contact me on Skype pls ( hsrutgers )
regards
Baltika
