Тема: How configure Teltonika FMC 125 with Iridium edge
Hello familly,
I need to know step by step how to configure the teltonika fmc 125 and Iridium edge. If anyone has experience with this can help me. urgent thank you
1
25/09/2024 11:08:26How configure Teltonika FMC 125 with Iridium edge
2
25/09/2024 11:34:11How configure Teltonika FMC 125 with Iridium edge
- mava
- Gurtam
- Неактивен
Re: How configure Teltonika FMC 125 with Iridium edge
Cedrick2024 пишет:
Hello familly,
I need to know step by step how to configure the teltonika fmc 125 and Iridium edge. If anyone has experience with this can help me. urgent thank you
Hello,
Please follow the steps below:
1) Connect Iridium accessory as shown in the first start manual - https://wiki.teltonika-gps.com/view/Iri … rst_Start.
2) On the RS232/RS485 tab of configurator, set Mode as RS232 and RS232 Mode as Satellite Backup.
3) In the SBD config, Iridium Edge should be enabled and save/send period Set. This section can be found in the “Features” tab in the configurator.
4) In Wialon, specify Teltonika IMEI as the first ID and Iridium ID as the second - https://gap.gurtam.team/CUGu7/XoPUPoXI26.png.
You can find more information in the manufacturer's Wiki:
Iridium Edge First Start - https://wiki.teltonika-gps.com/view/Iri … irst_Start
Iridium Edge Configuration - https://wiki.teltonika-gps.com/view/Iri … figuration
Hope it helps. If you have further questions, please, feel free to contact me.
С уважением,
Мария Волошина
Technical Care Engineer (L2), HW Specialist
Мария Волошина
Technical Care Engineer (L2), HW Specialist
3
25/09/2024 20:43:48How configure Teltonika FMC 125 with Iridium edge
Re: How configure Teltonika FMC 125 with Iridium edge
Thanks @mava, i have a problem receiving data from iridium satellite. I'm using traccar server, not sure if it doesn't support Iridium edge. What would you recommend to me?
4
07/10/2024 14:33:34How configure Teltonika FMC 125 with Iridium edge
(07/10/2024 14:33:49 отредактировано Teltonika Telematics)
- Teltonika Telematics
- Wialon fan club
- Неактивен
Re: How configure Teltonika FMC 125 with Iridium edge
Hello,
I would like to advise to reach out to Traccar in order to confirm that the Server supports Iridium Short Burst Data protocol.
As well, to investigate this issue please contact us on our official website https ://teltonika-gps.com and click on the “Contact Us” button. When you will click, please fill the form and submit it.
Kindly provide the following information.
- IMEI
- Number of Affected devices
- dump files
- log files
Note: Please also check what is the firmware version of your device, for Iridium Edge to work properly, correct firmware must installed on the FMC125 unit.
You can download the latest FMC125 firmware with Iridium Edge support here: https ://wiki.teltonika-gps.com/view/Iridium_Edge_Firmware_errata#Firmware_download_for_FMX125
In order to access the referenced pages, please copy and paste the links into your browser, as well please remove the spaces.
Best Regards.