How to get Unit Last update date and time

76Ответ от Diana

19/03/2021 11:57:35How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hello!

The requests events/load and events/get are used to get history events (trips, sensors, ignition , fuel thefts/fillings/consumption) which already registered in system
More - https://forum.gurtam.com/viewtopic.php? … 16#p186716

If you need to get current data, when unit is running online, you need to get use the following requests
https://sdk.wialon.com/wiki/en/sidebar/ … date_units - add units to session and specify event's detector
https://sdk.wialon.com/wiki/en/sidebar/ … ck_updates - execute request periodically to get data
See my previous answer - https://forum.gurtam.com/viewtopic.php? … 05#p183805

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

77Ответ от trushal.shah

26/04/2021 15:57:55How to get Unit Last update date and time

(26/04/2021 15:59:43 отредактировано trushal.shah)

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Hello

Can you help me with how I can execute this command [start engine"]?

http://localhost/wialon/ajax.html?svc=unit/exec_cmd&params={"itemId":11489,"commandName":"custom_msg","linkType":"tcp,vrt","param":"","timeout":1,"flags":0}&sid=04dfaf9bcf913b6fca84e821fb220b11

{
"error": 5
}

"cml": {
"1": {
"id": 1,
"n": "start engine",
"c": "custom_msg",
"l": "",
"p": "Juste un exemple",
"a": 1,
"f": 0
},
"2": {
"id": 2,
"n": "stop engine",
"c": "custom_msg",
"l": "",
"p": "stop engine",
"a": 1,
"f": 0
},
"3": {
"id": 3,
"n": "أمر جديد",
"c": "custom_msg",
"l": "tcp",
"p": "",
"a": 1,
"f": 0
}
},

Профиль

78Ответ от Diana

27/04/2021 12:16:31How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hello!

When you execute command you need to pass the same parameters which original command has, like link type, commandName and etc.

In your example,
"n": "start engine" - commandName
"l": "" - link type (empty value means 'Auto')
"p": "Juste un exemple" - specified parameters

So you need to execute request unit/exec_cmd with the following parameters

"params":{"itemId":11489,"commandName":"start engine","linkType":"","param":"Juste un exemple","timeout":1,"flags":0}

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

79Ответ от trushal.shah

27/04/2021 17:05:47How to get Unit Last update date and time

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Diana пишет:

Hello!
When you execute command you need to pass the same parameters which original command has, like link type, commandName and etc.
In your example,
"n": "start engine" - commandName
"l": "" - link type (empty value means 'Auto')
"p": "Juste un exemple" - specified parameters
So you need to execute request unit/exec_cmd with the following parameters
"params":{"itemId":11489,"commandName":"start engine","linkType":"","param":"Juste un exemple","timeout":1,"flags":0}

Hi thanks for the reply if I set this with APi i am getting "

Unrecognized:JUSTE un example"

and same from penal got this message

Command 'start engine' sent to unit 'Platinum'.

params={"itemId":11489,"commandName":"start engine","linkType":"","param":"TawasolMap","timeout":1,"flags":0}&sid=09fff31a9820105727644773ba146a80

Профиль

80Ответ от Diana

28/04/2021 11:24:42How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hi!

The device send this response to your command as I see on your screenshot, because there is not correct parameter 'Juste un exemple' for command. You need to send command (create command before for unit) with correct parameter for certain command. Please look to device's manual or request to manufacturer which parameters are correct for this command type.
Maybe here on forum - https://forum.gurtam.com/viewforum.php?id=18 you can find helpful information

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

81Ответ от trushal.shah

30/04/2021 14:03:09How to get Unit Last update date and time

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Hi,

Thanks for the reply now it's working for us

I just want to know how I can display Map on the report please check below API request

{svc=report/export_result, params={"format":2,"pageOrientation":"portrait","pageSize":"a4","pageWidth":0,"coding":"utf8","delimiter":"semicolon","headings":0,"compress":0,"attachMap":1,"extendBounds":0,"hideMapBasis":0,"outputFileName":"eabdalmnem_30-04-2021"}, sid=d628a7f4e54b4cb31c928154b234cbb8}

I had reviewed with hideMapBasis hide map layer: 0 - no, 1 - yes

"extendBounds":0
"hideMapBasis":1

"extendBounds":1
"hideMapBasis":1

"extendBounds":1
"hideMapBasis":0

extendBounds=0
hideMapBasis=0

Please find both files different only is right of the screenshot with map and left is without map.

Профиль

82Ответ от trushal.shah

03/05/2021 11:03:02How to get Unit Last update date and time

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Hello

I need your 2 bits of help

1. Above request how to display Map background on the report

2. How to get sensor engine operation value in the check_updates API

From search_item API we got all sens value check_updates API

"sens": {
"1": {
"id": 1,
"n": "حالة المحرك",
"t": "engine operation",
"d": "",
"m": "On/Off",
"p": "adc1",
"f": 0,
"c": "{\"act\":0,\"appear_in_popup\":true,\"ci\":{},\"mu\":0,\"pos\":1,\"show_time\":false,\"timeout\":0,\"uct\":0,\"unbound_code\":\"\",\"validate_driver_unbound\":0,\"consumption\":2}",
"vt": 1,
"vs": 0,
"tbl": []
},
"2": {
"id": 2,
"n": "الكهرب",
"t": "voltage",
"d": "",
"m": "V",
"p": "pwr_int",
"f": 0,
"c": "{\"act\":1,\"appear_in_popup\":true,\"ci\":{},\"cm\":0,\"mu\":\"0\",\"pos\":2,\"show_time\":false,\"timeout\":0,\"uct\":0}",
"vt": 1,
"vs": 0,
"tbl": []
}

I am looking for same value from update_unit API how i can get, i do get but I got a second sensor not first

svc=events/update_units&params={"mode":"add","units":[{"id":11489,"detect":{"sensors":0}}]}&sid=c0816af7dfa8862ae026cf4a1499f2d8

svc=events/check_updates&params={"detalization":3}&sid=9e0f2c649220ff65229c68a56de69f3e

"11489": [
{
"sensors": {
"2": {
"from": {
"t": 1615747447,
"y": 24.7718658447,
"x": 46.633014679
},
"to": {
"t": 1620026997,
"y": 24.7718448639,
"x": 46.6330413818
},
"m": 1620026997,
"f": 0,
"type": 4,
"value": 4.141
}
}
}
]
}

Профиль

83Ответ от Diana

03/05/2021 14:52:24How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hello!

1. If you need to attach map to the exported PDF file, you need to pass parameter "attachMap":1, "hideMapBasis":0

"hideMapBasis":1 means tracks and markers are shown on the blank background
"extendBounds":1 means option Squeeze in all graphics

For example, parameters for request report/export_result

{"compress":0,"attachMap":1,"hideGoogleLinks":0,"extendBounds":0,"hideMapBasis":0,"pageOrientation":"landscap","pageSize":"a4","pageWidth":"0","coding":"utf8","delimiter":"semicolon","headings":1,"outputFileName":"Volvo_awesome_!gtest_Eco_driving_03-05-2021_14-38-20","format":2}

2.The sensor engine operation is not included to 'sensors' event detector. To get data from this sensor type you need to get event type 'ignition'
So instead detector 'sensors' in request events/update_units just add detect 'ignition' - "detect":{"ignition":0} or "detect":{"ignition":1} as you already know the sensor id.

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

84Ответ от trushal.shah

11/05/2021 17:48:58How to get Unit Last update date and time

(11/05/2021 17:51:15 отредактировано trushal.shah)

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Hello Thanks for the reply it's working fine

to add the unit to get the update we set this API as per your suggestion and its working fine when we have small[20] set of units

but when I have 500 units then we get error

1.{"id":11489,"detect":{"ignition":0,"sensors":0}}
2.{"id":11499,"detect":{"ignition":0,"sensors":0}}
.
.
.
500 .{"id":11989,"detect":{"ignition":0,"sensors":0}}

<head>
<title>414 Request-URI Too Large</title>
</head>

events/update_units&params={"mode":"add","units":[{"id":11489,"detect":{"ignition":0,"sensors":0}}]}&sid=75252dc521f0c23fd8be8085452bd6ff

Профиль

85Ответ от Diana

13/05/2021 16:49:10How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hello!

First make sure that you perform POST request. There is basic limit to length of URL.
Also I think to monitor at one time all 500 units is quite complicated, even just to get information about all 500 units on one screen (specially mobile screen). So if in your app the units visualization are divided on several blocks (parts, pages) you can request to add units into session sequentially, if necessary.

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

86Ответ от trushal.shah

21/06/2021 13:51:12How to get Unit Last update date and time

(22/06/2021 12:44:45 отредактировано trushal.shah)

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Hello,

How I can get the last movement of the vehicle, i am not getting the last movement if any vehicle is running so i can display on the map.

for i.e my last trip was 2 PM after in parking, next i started at 6 PM and my car running so i could not get 6 PM running data till its moves as parking

can you please help me on this....

core/batch&params={"params":[{"svc":"events\/load","params":{"ivalType":1,"itemId":55873,"timeFrom":1623954600,"timeTo":1624040999,"detectors":[{"type":"trips","filter1":0}]}},{"svc":"events\/get","params":{"selector":{"type":"*","timeFrom":1623954600,"timeTo":1624040999,"detalization":11}}},{"svc":"events\/get","params":{"selector":{"type":"*","expr":"trips{s<1}","timeFrom":1623954600,"timeTo":1624040999,"detalization":11}}}],"flags":0}&sid=47a5b1d3697adb0fe149fb7a3c086559

Профиль

87Ответ от Diana

24/06/2021 13:57:01How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hi!

You can use the several ways :

1) Just get the last message from request search item(s) with flag = 1024, last message and position
Flags - https://sdk.wialon.com/wiki/en/sidebar/ … ormat/unit
Search item(items) - https://sdk.wialon.com/wiki/en/sidebar/ … les/search

2) To get current event (trip or stop) via requests events/update_units & events/check_updates (not events/load, it's used only to get history data) - https://sdk.wialon.com/wiki/en/sidebar/ … ck_updates
https://sdk.wialon.com/wiki/en/sidebar/ … date_units
Here more useful information (webinar) how to work with these requests (methods event) - https://www.youtube.com/watch?v=nUtNS5Al5wo

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

88Ответ от trushal.shah

24/06/2021 16:37:24How to get Unit Last update date and time

(24/06/2021 17:28:13 отредактировано trushal.shah)

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Thanks for update

The query is above API will get the vehicle's last location.

e.t my last trip ends at 2 PM and I have started at 3 Pm new trip and continue

I can get till 2 PM all location of the vehicle but Runnin trips[All movement need to display at Map] i am not sure how i can get
with

can we made any cane in load / get trip data API

like till last message movement data on map

Please find attach the request

Профиль

89Ответ от Diana

28/06/2021 14:02:21How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

Hi!

yes, you can get current trip via events requests - events/check_updates
where in JSON response in 'to' you will get the last coordinates

"to": {
            "t":<uint>,    /* time (UNIX-time) */
            "y":<double>,    /* latitude */
            "x":<double>    /* longitude */
        }

For example

1. Add unit to session - https://sdk.wialon.com/wiki/en/sidebar/ … date_units
events/update_units

params
{"mode":"add","units":[{"id":21728414,"detect":{"trips":0,"sensors":0}}]}

2. Execute request check_updates
events/check_updates

params {"detalization":3}

In response we get current trip which starts at 1624876649 Jun 28 2021 13:37:29 GMT+03
"state": 1 means that the trip is going ( /* state: 0 - parking, 1 - trip, 2 - stop */ )
the last message and location in parameter 'to'

"trips": {
                "from": {
                    "t": 1624876649,
                    "y": 53.4268836975,
                    "x": 27.9888801575
                },
                "to": {
                    "t": 1624877580,
                    "y": 53.4268836975,
                    "x": 27.9888801575
                },
                "m": 1624877580,
                "f": 2,
                "state": 1,
                "max_speed": 23,
                "curr_speed": 23,
                "avg_speed": 0,
                "distance": 0,
                "odometer": 2147483648,
                "course": 90,
                "altitude": 90,
                "pos_flags": 0
            }

3 Again execute events/check_updates and get the new data:
updated last position and time in parameter 'to'
the "state": 1 , so the trip is still going

 "trips": {
                "from": {
                    "t": 1624876649,
                    "y": 53.4268836975,
                    "x": 27.9888801575
                },
                "to": {
                    "t": 1624877925,
                    "y": 51.4268836975,
                    "x": 27.9888801575
                },
                "m": 1624877925,
                "f": 2,
                "state": 1,
                "max_speed": 120,
                "curr_speed": 120,
                "avg_speed": 628,
                "distance": 222553,
                "odometer": 2147483648,
                "course": 90,
                "altitude": 90,
                "pos_flags": 0
            }
        }

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль

90Ответ от trushal.shah

28/06/2021 15:28:26How to get Unit Last update date and time

trushal.shah
Wialon fan club
Неактивен

Зарегистрирован: 21/09/2020
Сообщений: 71
Карма: 3

Re: How to get Unit Last update date and time

Thanks for the update

yes, this I do use to display running car on the map and its movement

but here I need to display his all past and current running movement on the Map

e.g I started my vehicle at 6 AM and I moves to continue for 5 hours, till 11 AM

and in between if I want to see his trip all position on the Map from 6 to 8 and still vehicle is moving,

Профиль

91Ответ от Diana

07/07/2021 09:10:51How to get Unit Last update date and time

Diana
Gurtam
Неактивен

Зарегистрирован: 08/10/2012
Сообщений: 1,470
Карма: 301

Re: How to get Unit Last update date and time

trushal.shah пишет:

Thanks for the update
yes, this I do use to display running car on the map and its movement
but here I need to display his all past and current running movement on the Map
e.g I started my vehicle at 6 AM and I moves to continue for 5 hours, till 11 AM
and in between if I want to see his trip all position on the Map from 6 to 8 and still vehicle is moving,

Hello!

In this case to get all messages from event you can pass digitalization flags 16 plus 8 , for example total "detalization":25

The response

"msgs":[{"tm":1454479860,"x":38.4273986816,"y":65.6319351196,"z":30,"c":18,"m":0,"s":10}...], // all messages
"track":"qvqoKejpiFkG??mIaAlI?{Sg^zSyS?"}} // track in Google notation https://developers.google.com/maps/docu … ineutility

Diana Cheley
Wialon Hosting Expert
Gurtam

Профиль