Тема: concox GT06N
Hello,
Does anyone have a script or a manual to configure this type of device?
I have a new client using this type of devices, in other plataform but i need an advice to chance them
Thank you
1
01/10/2015 18:21:43concox GT06N
- angelgps
- Wialon fan club
- Неактивен
3
19/10/2015 23:21:20concox GT06N
- angelgps
- Wialon fan club
- Неактивен
Re: concox GT06N
here its the´picture,
thank you
Опубликовать вложения
1-130G11F117.pdf 437.5 Кб, файл был скачан 1909 раз(а)
4
01/11/2015 10:29:25concox GT06N
- JohnG
- Gurtam Partner
- Неактивен
Re: concox GT06N
All of the configuration settings you can use are in the manual you attached so you should be able to get it operational relatively quickly.
Phoenix Solusi
Mobile Visible Secure
Specialists in data acquisition and analysis for mobile and fixed assets. Integration in to content management systems is a specialty we have.
Mobile Visible Secure
Specialists in data acquisition and analysis for mobile and fixed assets. Integration in to content management systems is a specialty we have.
5
05/11/2015 18:12:30concox GT06N
- angelgps
- Wialon fan club
- Неактивен
Re: concox GT06N
thank you John G
6
08/11/2015 06:55:27concox GT06N
- JohnG
- Gurtam Partner
- Неактивен
Re: concox GT06N
Did you get the unit showing up in Wialon OK? Let me know if you need any help.
Phoenix Solusi
Mobile Visible Secure
Specialists in data acquisition and analysis for mobile and fixed assets. Integration in to content management systems is a specialty we have.
Mobile Visible Secure
Specialists in data acquisition and analysis for mobile and fixed assets. Integration in to content management systems is a specialty we have.
7
07/06/2016 10:27:45concox GT06N
Re: concox GT06N
Hello.
For proper operation of the device you need to configure it by SMS. I'm sending to the device SMS:
SERVER,1,193.193.165.165,20859,0 #
and he answers:
Error: Parametr 2 domain is not formatted correctly!
what to do?
8
07/06/2016 10:40:00concox GT06N
- yavi
- Wialon fan club
- Неактивен
Re: concox GT06N
danis try to send next command:
SERVER,1,gpsgsm.org,20859,0#
Viktor Yarovenko
Business Analyst
Wialon
Business Analyst
Wialon
9
07/06/2016 10:44:22concox GT06N
Re: concox GT06N
yavi пишет:
danis try to send next command:
SERVER,1,gpsgsm.org,20859,0#
it worked, thank you
Re: concox GT06N
What is responsible for the input of the ignition ?
Photo data from the device attached.
11
08/06/2016 11:34:04concox GT06N
- yavi
- Wialon fan club
- Неактивен
Re: concox GT06N
danis Nobody (except you/your installer) knows about which input is connected to ignition circuit wire.
May be this parameter is coded into I/O parameter (I/O=44)
After understanding which input transmits your ignition I advice you to learn more about "bitwise parameter control".
http://docs.gurtam.com/en/hosting/cms/u … sors/param
Viktor Yarovenko
Business Analyst
Wialon
Business Analyst
Wialon
12
21/10/2016 17:59:05concox GT06N
Re: concox GT06N
Hello
Has anyone had problems with the messages you send GT06N when in blind zone?
regards
13
08/12/2016 01:17:08concox GT06N
Re: concox GT06N
Dears i have GT06N , I have problem with Engine hours =00:00 thanks to advice how to set Engine hours counter
14
13/07/2017 23:47:38concox GT06N
- JulioRodriguez
- Wialon fan club
- Неактивен
Re: concox GT06N
http://nyomkoveto.top5.hu/img/gt06-N/GT … ancsok.pdf
Command list for all device Concox GT06xx
Julio R. | Gerente de Producto Telematics
15
15/07/2017 14:24:25concox GT06N
Re: concox GT06N
Hello
If the device is in offline mode is there any command to know whether the device is manually disconnected or some other problem like GSM issue.
16
22/03/2018 10:56:24concox GT06N
Re: concox GT06N
Can anyone assist, gt06n
send - server,1 gpsgsm.org, 20859, )#
error: parameter 1 (0/1)
send - server, 0, 193.193.165.165, 20859, 0#
error: parameter 1 (0/1)
what am i doing wrong
17
05/04/2018 03:13:32concox GT06N
- FleetPursuit
- Gurtam Partner
- Неактивен
Re: concox GT06N
matthewcpt пишет:
Can anyone assist, gt06n
send - server,1 gpsgsm.org, 20859, )#
error: parameter 1 (0/1)send - server, 0, 193.193.165.165, 20859, 0#
error: parameter 1 (0/1)what am i doing wrong
We send same exactly as: SERVER,0,193.193.165.165,20859,0# and always works fine for us.
We send APN & Timer command first then Server command.
Silly question maybe but is it a matter of "UPPERCASE"? I have no units here at present to test on to know.
Regards
Onwards and Upwards!!
Knowledge, data & information is power!
Knowledge, data & information is power!
18
25/04/2018 17:18:18concox GT06N
- shal
- Gurtam
- Неактивен
Re: concox GT06N
Hello!
Concox GT06 as some other Concox devices now can be mouse-click configured when connecting via flespi to Wialon. Even without conection you may use SMS-based configuration for the same settings from flespi. Want to remind that this is totally free for use.
Please follow detailed instructions in order to put flespi between Wialon and device.
At the dark side of telematics...
19
28/07/2018 00:21:51concox GT06N
- lpscolombia
- Wialon fan club
- Неактивен
Re: concox GT06N
buen dia comunidad gurtam-wialon
tengo un problema con estos equipos CONCOX en general, cuando estan fuera de cobertura GPRS (fuera del país) o en zona de frontera pierden la señal como es lógico, pero siguen almacenando la información sin problema.
Particularmente, sucedió que duró tres días un dispositivo en otro país, y cuando se conectó de nuevo Wailon recibió la información como si todo el recorrido de tres días hubiese sucedido en menos de 5 minutos, minutos en los que tardó en subir al servidor la información alojada en memoria.
En afán de verificar, configuré el mismo dispositivo al servidor original TRACKSOLID.COM y luego de varios días sin cobertura, evidenció que al retomar la conexión si coinciden las horas y el kilometraje.
Quisiera saber si alguno ha evidenciado el mismo problema
Gracias, agradezco aportes
Lps Trackers
20
02/08/2018 17:29:13concox GT06N
Re: concox GT06N
lpscolombia
Buenos días,
Mándenos por favor el nombre de la unidad y el tiempo cuando sucedió lo descrito a support@gurtam.com
Gracias
21
03/08/2018 01:22:40concox GT06N
- lpscolombia
- Wialon fan club
- Неактивен
Re: concox GT06N
GRACIAS COLEGAS
les comento que acabo de hacer pruebas con el equipo en cuestión, pero hice las pruebas en la plataforma del fabricante, lo dejé tres horas sin GPRS y al restablecerle la información fue graficada correctamente, como era de esperarse,
voy a insistir en gurtam y espero que se llegue a una solución, pues tengo buena cantidad de equipos de esa marca, me vería bastante afectado.
les estaré comentando
Lps Trackers
22
03/08/2018 01:23:48concox GT06N
- lpscolombia
- Wialon fan club
- Неактивен
Re: concox GT06N
Gracias, ya retomo contacto y planteo nuevamente el caso, ya había sido cerrado, preferiría que fuera mejor tratado por skype si es posible
usuario: gerson_lpscolombia
quedo atento
yuhr пишет:
lpscolombia
Buenos días,
Mándenos por favor el nombre de la unidad y el tiempo cuando sucedió lo descrito a support@gurtam.com
Gracias
Lps Trackers
23
03/08/2018 15:56:17concox GT06N
Re: concox GT06N
lpscolombia Acabo de enviarle un email para seguir el tema en el ticket original.
Espero su respuesta.
Gracias
24
06/09/2018 08:09:11concox GT06N
Re: concox GT06N
I am having the same issue as lpscolombia.
It appears that all 'old data' (stored data during no GPRS) have the same timestamp when being pushed back to the server after GPRS are re-established. *see attached picture.
I opened a support ticket and from the log it seems that it was sent that way by GT06N. There has to be a way to deal with this as I understand that in Tracksolid (the original platform), there is no such issue. It might be related to 'Information Serial Number' in its protocol doc or maybe there is something wrong in the integration.
I will try to email the hw guys and see if they can help.
25
06/09/2018 09:47:25concox GT06N
- shal
- Gurtam
- Неактивен
Re: concox GT06N
bhalim, Concox devices contain configurable timezone setting that generates different time then server can expect. Some servers, e.g. flespi can read it from device during connection stage, some expects it in UTC timezone.
I recommend you to change this setting to UTC (zero) timezone to prevent any troubles in the future with any kind of server.
At the dark side of telematics...