1

➤ CalAmp

(edited by shev 19/02/2015 16:15:01)

Topic: ➤ CalAmp

CalAmp F.A.Q.

Topics: | LMU-300 >> | LMU2720 >> | LMU 4225 >> | LMU-700 >> |

Description (Tracking And Telemetry Devices): | ATU-620 | LMU-1100 | TTU-700 | TTU-1200 | TTU-2820 |

Description (Fleet Tracking Units): | LMU-300 | LMU-400 | LMU-700 | LMU-800 | LMU-900 | LMU-1100 | LMU-1200 | LMU-2000 | LMU-2100 | LMU-2600 | LMU-2700 | LMU-3030 | LMU-4200 | LMU-4520 | LMU-5000 | MDT-7 |


Manuals / Instructions:

Useful information:


Dear friends, if you have any additional materials for the Calamp devices, please don't hesitate to add materials.
Best regards,
Evgeny Shatilo
Gurtam HW Development Team Lead
1

➤ CalAmp

(edited by small_gprs 24/12/2015 00:47:12)

Re: ➤ CalAmp

here is a small program wich adds a crc terminator to *.csv files (aka scripts) in order to send them serially to trackers [32 bit devices] using hyperterminal y transfer option

+ show spoiler
--
Spread the AVL- World
2

➤ CalAmp

Re: ➤ CalAmp

a full peg script development example


                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
3

➤ CalAmp

Re: ➤ CalAmp

Full description for well understand Calamp technology's, from Olimex guys


                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
4

➤ CalAmp

Re: ➤ CalAmp

PDF

Installing a Calamp 3030 OBD Device

https://drive.google.com/file/d/0B_mvN9 … sp=sharing


                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
5

➤ CalAmp

Re: ➤ CalAmp

Calamp releases the LMU1230 that replaces old technology using the award winning EHS5's module from Gemalto

http://www.calamp.com/system/files/reso … asheet.pdf

Install file for download


                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
6

➤ CalAmp

Re: ➤ CalAmp

New Calam CVF-200 advanced avl Unit with Skymart technology, think as new LMU3xx generation devices, all support accelerometer starter disable , tow detection and internal battery backup

please download install guide here

+ show spoiler

                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
7

➤ CalAmp

Re: ➤ CalAmp

Using an Arduino USB adapter to read Calamp Devices

Many Calamp devices use cmos/ttl RS232 iface in order to send debug data and used to main comm port for external devices, this figure show how can we get it done using popular Arduino USB-TTL converter CH340 cable,

➤ CalAmp

in this case the use is for LMU800/LMU700 Series but also work for most of models, only remember that in these models i/o pins are shared with rs232 functionality so in order to get enable the uart port please use ATS130=0 at command just after reseting device


                                                                                                                                        the message has been saved in the header.

--
Spread the AVL- World
8

➤ CalAmp

Re: ➤ CalAmp

Manager tool for PEG  programming i found !

--
Spread the AVL- World
9

➤ CalAmp

Re: ➤ CalAmp

shev  Kindly would you help me

10

➤ CalAmp

Re: ➤ CalAmp

Here is it a 15 Lines Minimalist ol' School AT script for any calamp devices

0.-AT$APP GPRS CONTEXT 0 "your_apn"    //APN
1.- AT$APP PPP USER "apn_username"                        
2.- AT$APP PPP PASSWORD "apn_pswd"                
3.- AT$APP INBOUND 193.193.165.165:port     // Port depends on LMU model, pls see  http://gurtam.com/en/hw-manufacturers/calamp                  
4.- AT$APP PARAM 262,0,30                    //Time Distance Profile 0 (Time=30 secs)
5.- AT$APP PARAM 263,0,800                    //Time Distance Profile 0  (Distance=800m )
6.- AT$APP PARAM 264,0,60                    //Time Distance Profile 0  (Heading=60є)
7.- AT$APP PARAM 265,1,900                    //Timer 1 = 15 min for reports when unit off
8.- AT$APP PARAM 512,0,3,0,0,0,7,0,0,0      // Start  time-distance profile 0 on reset  OR power up
9.- AT$APP PARAM 512,1,16,0,0,0,6,0,0,0     // When Ignition off stop actual profile running
10.-AT$APP PARAM 512,2,16,0,0,0,13,1,0,0   // When Ignition off start timer 1 ()
11.-AT$APP PARAM 512,3,18,1,0,0,1,10,0,0    // When timer ran out send report (EVcode 10) Unit off reports
12.-AT$APP PARAM 512,4,17,0,0,0,1,11,0,0     // When Time-Distance updates send report (EVcode 11) Unit on reports
13.-AT$APP PARAM 512,5,16,0,0,0,1,12,0,0     // Send EVcode 12 when Ignition Off
14.- AT$APP PARAM 512,6,15,0,0,0,1,13,0,0      // Send EVcode 13 when Ignition On

Event Codes
10 Reports when Unit is Off (parking)
11 Reports when Unit is Moving
12 Ignition Off
13 Ignition On


Hope can be useful !!

--
Spread the AVL- World
11

➤ CalAmp

Re: ➤ CalAmp

good day,
Does anyone has a toolmananger or documentation regarding calamp devices ?
a new client has this type and wants to work with Wialon.
i dont have an account with calamp, so i asking for your assistance

thank you

12

➤ CalAmp

Re: ➤ CalAmp

Or SMS command line ?

Thank you

13

➤ CalAmp

(edited by yavi 24/03/2016 09:40:58)

Re: ➤ CalAmp

angelgps All Calamp legitimate customers have access into PULS
http://www.calamp.com/products/puls 
All information is inside the PULS.
Please ask your customer to share PULS access with you.
Also some documents are placed in the first message of this topic.

Viktor Yarovenko
Business Analyst
Wialon
14

➤ CalAmp

Re: ➤ CalAmp

When creating new units in Wialon for CalAmp LMU devices do you use the ESN or IMEI number?

Onwards and Upwards!!
Knowledge, data & information is power!
15

➤ CalAmp

Re: ➤ CalAmp

Hi,

Typically ESN, but through PEG scripting language you can define if you want the device to transmit ESN or IMEI as an ID.

16

➤ CalAmp

Re: ➤ CalAmp

Hi to all,

We are looking for someone that is capable of scripting CalAmp devices.

We have access to PULS Wiki etc but we just need to have someone create the scripts for us, as this is something we are not able to to very well.

Currently we have a number of LMU 3030 scripted and in utility vehicles (Mitsubishi Tritons) and they are not working correctly, We believe that they are not picking up or recognising when vehicle engine is on and therefore stay in sleep mode while logging every 10 minutes. Showing no tracking or movement just straight lines between each logging.

If anyone can assist please PM me.

Thanks.

  • ➤ CalAmp
Onwards and Upwards!!
Knowledge, data & information is power!
17

➤ CalAmp

Re: ➤ CalAmp

FleetPursuit  Please send us your current configuration file to hw@gurtam.com
We'll try to help you.

Viktor Yarovenko
Business Analyst
Wialon
18

➤ CalAmp

Re: ➤ CalAmp

hi !

You can send to the unit the SMS !VV   in order to know if Mitsubishi is or not compatible with some protocolo in the OBD-2 Standard, This SMS will return the Vehicle Detection status, VIN, supported VBus Parameters and Indicators, and the current count of DTC's detected

--
Spread the AVL- World
19

➤ CalAmp

(edited by mechatronica 03/10/2016 17:47:56)

Re: ➤ CalAmp

Dear Evgeny

Here is a Calamp-Wialon question.  At now seems only voltage-type fuel level sensors are supported. But digital interface will provide better results and precision.  Several Wialon users want to use them, but we need to solve a simple problem.
Calamp LMU 2700 uses RS232 port for Text messaging. We have built a special firmware for Calamp and now LMU device receive volume value and send to Wialon. But in text field as "user_msg_1" parameter

Any chance to convert them to sensor value, for example : from "554" to 554?

Thanks!


EDIT : Now digital fuel level sensors are working with Calamp via RS232 interface

Датчики расхода и уровня топлива, системы бортового взвешивания, контроля температуры и другое оборудование для телематики
Manufacturer of fuel level/consumption sensors, onboard weighing, temperature sensors, displays.... etc.
mechatronics.by        facebook.com/mexatronika     instagram.com/mechatronics_belarus    youtube.com/c/MechatronicsTV
20

➤ CalAmp

Re: ➤ CalAmp

Hi, i have LMU4200 with jPro, but this present error for jPro "APP:UserApp not present ERR:256", someone knows why?

  • ➤ CalAmp
21

➤ CalAmp

Re: ➤ CalAmp

harobaua wrote:

Hi, i have LMU4200 with jPro, but this present error for jPro "APP:UserApp not present ERR:256", someone knows why?

you need to configure the streams as D board for the pod,  si the Jpod or Vpod?

--
Spread the AVL- World
22

➤ CalAmp

Re: ➤ CalAmp

almost entire models are now into HSPA or UTMS or HSPA+  (i.e 3G)

--
Spread the AVL- World
23

➤ CalAmp

Re: ➤ CalAmp

Hello,

Firstly, I would like to thank you people for the material. ( even though A few of those links seem to not be working).
I am doing a project currently and this is an overview of it.
I have a CalAmp LMU3030 which I will use to monitor a certain ID on the CAN bus. This ID has 9 MUx Messages. Once all these 9 messages are detected, I will have to send a message to the back end user.
Since I am new to PULS and PEG. Can someone help me getting starting with these tools and how to go about with this project.
Thanks

24

➤ CalAmp

Re: ➤ CalAmp

LMU3030 OBD-Data Bus messages (up to 21 or something like that), you need the script i can provide, but also you need acces to puls in order to upload it.

inside the puls page there are a lot of documentation about the structure and message, feel free to ask any other info.

--
Spread the AVL- World
25

➤ CalAmp

Re: ➤ CalAmp

Hey hi..
Sounds awesome to me.
Can you send me the script (my mail id is gokulsreedhar91@gmail.com). Also how to get access to puls?? I checked online but nuhtin came up.
Thanks again.

26

➤ CalAmp

Re: ➤ CalAmp

hello, please check your inbox

--
Spread the AVL- World
27

➤ CalAmp

Re: ➤ CalAmp

Hello,

I have got access to puls wiki and I am going through the documentation.
I have a few doubts and it would be really helpful if you could guide me on the same. (PS  My hardware has been shipped and will be arriving soon. smile)

1)To set GPIO 1 as an output and GPIO 2 as an input you would use:
AT$APP PARAM 1024,39,1,1
AT$APP PARAM 1024,39,2,0
Or you could use the single command of
ATS157 = 1---------------------------this should be ATS159 as the ID is 39???? right????

2) Restoring values through a power cycle
The LMU is capable of storing some of its values to nonvolatile memory so that they can be restored after a power cycle. The following values may be stored:
The values of all 16 or 32 Accumulators (since 25d in LMU3000)---------------------what does 25d mean here?? is it 25 in decimal?? I find it difficul to understand this part.
The states of all 16 or 32 PEG Flags (since 25d in LMU32 family)


Also, Can you guys suggest me an easy way to start learning how to script..Like are there any short cuts to learn this stuff.. Any help would be appreciated.

28

➤ CalAmp

Re: ➤ CalAmp

gokulsreedhar91  Calamp devices are very complicated that's why there are no easy ways to configure it.
All manuals you can download from yuor PULS account.
Also I suggest you to use "Calamp LMU manager" for configuration instead of AT commands..

Viktor Yarovenko
Business Analyst
Wialon
29

➤ CalAmp

Re: ➤ CalAmp

hi..Thanks yavi..
I am also having trouble typing anything into my hyper- terminal.
Can I type inside the terminal only after i get the device connected. I know it makes no sense but I just want to see what kind of error i get if I try to communicate from an hyperterminal without the LMU.
But the problem is I am not able to enter anything!!

30

➤ CalAmp

Re: ➤ CalAmp

gokulsreedhar91 You should connect device at first.
You can't do anything without connection.

Viktor Yarovenko
Business Analyst
Wialon
31

➤ CalAmp

Re: ➤ CalAmp

gokulsreedhar91 wrote:

Hello,

I have got access to puls wiki and I am going through the documentation.
I have a few doubts and it would be really helpful if you could guide me on the same. (PS  My hardware has been shipped and will be arriving soon. smile)

1)To set GPIO 1 as an output and GPIO 2 as an input you would use:
AT$APP PARAM 1024,39,1,1
AT$APP PARAM 1024,39,2,0
Or you could use the single command of
ATS157 = 1---------------------------this should be ATS159 as the ID is 39???? right????

2) Restoring values through a power cycle
The LMU is capable of storing some of its values to nonvolatile memory so that they can be restored after a power cycle. The following values may be stored:
The values of all 16 or 32 Accumulators (since 25d in LMU3000)---------------------what does 25d mean here?? is it 25 in decimal?? I find it difficul to understand this part.
The states of all 16 or 32 PEG Flags (since 25d in LMU32 family)


Also, Can you guys suggest me an easy way to start learning how to script..Like are there any short cuts to learn this stuff.. Any help would be appreciated.

Hello

1.-
Use PEG actions instead,  for SET Output 0

AT$APP PEG ACTION 8 0

To RESET Ouput 0

AT$APP PEG ACTION 9 0

2.-
25d means firmware version (actually 2.5d)

--
Spread the AVL- World
32

➤ CalAmp

Re: ➤ CalAmp

Hi all,
I have received two LMU 3030 devices and I also have access to PULS wiki.
I would like to start by writing a small script on them (like GPS tracking, Ignition ON etc).
Can you suggest how I write a script for this.
Your help will be highly appreciated.

33

➤ CalAmp

Re: ➤ CalAmp

gokulsreedhar91 you can set  logic of device, like an tracking, Ignition ON etc. with help of CalAmp LMU Manager. To understand how to work with LMU manager, please, read about it on CalAmp wiki (https://puls.calamp.com/wiki/LMU_Manager_User's_Guide_V8.3). We also can help you to set basic settings of device (APN,server,port etc), but for this, please, write to hw@gurtam.com. Thank you.  .

34

➤ CalAmp

Re: ➤ CalAmp

Hello,

Having gone through the documentation to create a script, I find that, the main format of how to write a script file for a particular purpose is missing.
For Example: The LMU Manager’s User Guide has ‘The Programming cookbook’ incomplete.
The document however has examples but I feel that just Importing them will not help in understanding the subject.
It would be helpful if you could share some internal documents that could help me create my own scripts.

35

➤ CalAmp

Re: ➤ CalAmp

gokulsreedhar91  We have no any internal documents.
Calamp is very complicated but functional tracker. It is impossible to learn it very fast. Nobody can explain you in a few words all nuances. We can create the basic script for Wialon only. But it will be only small part of all functions,

Please ask Calamp support about details of configuration.

Viktor Yarovenko
Business Analyst
Wialon
36

➤ CalAmp

Re: ➤ CalAmp

please see on this post, there is a complete AT Script

--
Spread the AVL- World
37

➤ CalAmp

Re: ➤ CalAmp

Hi,

We have a number of LMU-3030 OBDs in service with our customers and wondering if someone could shed some light on an issue we constantly have.

It seems that the device takes some time to lock on to signal and start taking data, example, it may take up to 5kms before it shows any tracking. It is noted when pulling reports and it doesn't send an Exit geofence because it exited well before the device was triggered. We only get Enter geofence when it returns to the office. I speak in this case one of our own vehicles - a BMW X5, all too often short trips (5km round trip) is not even recorded in tracking because it has not connected yet..

Our customers have a "basic" track and trace requirement so there are not complicated needs for diagnostics etc.

I have attached an image to show what I am speaking of.

Any assistance or insight would be very welcome, we are now trialing an alternative OBD device for us to use in place of the LMU-3030 for all future sales as we cannot seem to rely on this CalAmp device.

  • ➤ CalAmp
Onwards and Upwards!!
Knowledge, data & information is power!
38

➤ CalAmp

(edited by small_gprs 05/02/2017 06:54:20)

Re: ➤ CalAmp

it seem weird, as this device is very agresive in terms to connect to wireless network, in many ways you can add in your script a lot of peg action in order to force to release its buffer or  force to connect to network asap, can you share (pm) your script? i can take a look to see why your geo-fences logic doesn't work...

I have one 3030's in my current car and it never stops to send me alerts when RPM is too high or when i leave/arrive the  office or home. there are 2 Mega-Processor that always react in no time to monitoring conditions, but it depends mainly from how script was designed.

do you use HB mechanism? do you use low power techniques? there is alot of thing you can do to make it very very reliable tracker...

--
Spread the AVL- World
39

➤ CalAmp

Re: ➤ CalAmp

small_gprs wrote:

CDMX

Thanks small_gprs, we have the CalAmp agents here in Australia configure for us when we purchase them.

We have been going back and forth with them and the latest config change has been to turn off the device filtering - they think it might be the issue and too aggressive.

We put it to a small test on Saturday to see if it made any difference and it is now tracking as it should be.

They also changed the ignition config so am not sure which change made the difference, although it is now seemingly working as we would expect, however will continue to monitor to confirm.

Cheers.

Onwards and Upwards!!
Knowledge, data & information is power!
40

➤ CalAmp

Re: ➤ CalAmp

Hi everyone, can do you help me with a script for my LMU 2630 tank you

41

➤ CalAmp

Re: ➤ CalAmp

http://avl.hobby-site.org/blog/?p=82

--
Spread the AVL- World
42

➤ CalAmp

Re: ➤ CalAmp

Looking for some help with setting up of unit sensors, within unit settings for CalAmp.

We have the units scripted for us and the event codes for basics are as below, how do we set up a sensor to show Ignition on/off?

Thanks.

Event Codes they used:

IGNITION_ON        2
IGNITION_OFF        3
PERIODIC/DISTANCE    0
START MOVING        60
STOP MOVING        61
SPEED ABOVE THRESH    12
SPEED BELOW THRESH    13
10_MINS_AFTER_POWERUP    5
BATTERY_LOW        99

Onwards and Upwards!!
Knowledge, data & information is power!
43

➤ CalAmp

Re: ➤ CalAmp

Good day!

Could you please write to hw@gurtam.com. At letter please, indicate your question and device ID. Thank you.

44

➤ CalAmp

Re: ➤ CalAmp

FleetPursuit wrote:

Looking for some help with setting up of unit sensors, within unit settings for CalAmp.

We have the units scripted for us and the event codes for basics are as below, how do we set up a sensor to show Ignition on/off?

Thanks.

Event Codes they used:

IGNITION_ON        2
IGNITION_OFF        3
PERIODIC/DISTANCE    0
START MOVING        60
STOP MOVING        61
SPEED ABOVE THRESH    12
SPEED BELOW THRESH    13
10_MINS_AFTER_POWERUP    5
BATTERY_LOW        99

those are events, what you need is to set up sensors, under unit properties click on tab sensors, there is a list with all data and parameters device sent

so by example to make an ignition sensor do the follow


➤ CalAmp

  • ➤ CalAmp
--
Spread the AVL- World
45

➤ CalAmp

Re: ➤ CalAmp

small_gprs wrote:
FleetPursuit wrote:

Looking for some help with setting up of unit sensors, within unit settings for CalAmp.

We have the units scripted for us and the event codes for basics are as below, how do we set up a sensor to show Ignition on/off?

Thanks.

Event Codes they used:

IGNITION_ON        2
IGNITION_OFF        3
PERIODIC/DISTANCE    0
START MOVING        60
STOP MOVING        61
SPEED ABOVE THRESH    12
SPEED BELOW THRESH    13
10_MINS_AFTER_POWERUP    5
BATTERY_LOW        99

those are events, what you need is to set up sensors, under unit properties click on tab sensors, there is a list with all data and parameters device sent

so by example to make an ignition sensor do the follow


➤ CalAmp

Thanks small_gprs,

The main issue with these Calamps is that 30 or so parameters for LMU303 and other models.Is there somewhere that advises us of which parameter does what? Otherwise it is a lot of time trial and error with all this units in service with customers.

The CalAmp agent who applied the script gave us these event codes to help us set up sensors.

Alaiksandr from Gurtam has since helped use by building some sensors for us for the LMU2600 devices we have. Now we need to work out the other models.

We gave up using Calamp and have only around 40 left in service, we find them to complex for scripting, too expensive for purchasing and noncompetitive.

Onwards and Upwards!!
Knowledge, data & information is power!
46

➤ CalAmp

Re: ➤ CalAmp

We already created sensors for other models too:)

47

➤ CalAmp

Re: ➤ CalAmp

I can help in detailed events or parameters calamp sent, Duo Wialon+Calamp is best solution around, can be a little expensive due Calamp is built in USA real high quality , any way, good luck !

--
Spread the AVL- World
48

➤ CalAmp

Re: ➤ CalAmp

small_gprs wrote:

I can help in detailed events or parameters calamp sent, Duo Wialon+Calamp is best solution around, can be a little expensive due Calamp is built in USA real high quality , any way, good luck !

Thanks, this would be of good value.

Agreed that CalAmp is a good solution but not when you are so easily priced out by competitors.

We have stopped using CalAmp now for 2 main reasons:

1. Yes, definitely because of the cost, e.g. in Aus they are approx $250 for LMU2620 far to expensive to be competitive even LMU720 similar!
2. Difficult to do scripting and to manage, additional cost to have scripting done for us.

We trialed some 18 months ago and only have approx. 40 with customers, with no real intention to sell any more as we have found more cost effective solutions where we can easily manage all configs ourselves, build sensors in Wialon easily and substantially less in cost to purchase. Giving us total control back.

Onwards and Upwards!!
Knowledge, data & information is power!
49

➤ CalAmp

Re: ➤ CalAmp

the price for the each unit is volume dependant, in America that model is sell around 100 usd and lowest each time, also you can use any brand supported by wialon, there is a lot out there, any of them need always time to learn,  good luck

--
Spread the AVL- World
50

➤ CalAmp

Re: ➤ CalAmp

small_gprs wrote:

the price for the each unit is volume dependant, in America that model is sell around 100 usd and lowest each time, also you can use any brand supported by wialon, there is a lot out there, any of them need always time to learn,  good luck

Yes, volume discounts apply and this the 100 unit price, the CalAmp devices we still have with customers currently are legacy ones and they have had now for about 2 years.

The brands we had chosen to go with for the past years have done us very well and are competitive plus never had any issues or breakdowns..

Onwards and Upwards!!
Knowledge, data & information is power!
51

➤ CalAmp

Re: ➤ CalAmp

FleetPursuit wrote:

The brands we had chosen to go with for the past years have done us very well and are competitive plus never had any issues or breakdowns..

Congrats, the main issue is that Bussines keep going on.

--
Spread the AVL- World
52

➤ CalAmp

(edited by small_gprs 25/03/2017 05:31:06)

Re: ➤ CalAmp

Hi all, 

this is a classic LMU3030 but using BT as wireless iface, connect it to your Smartphone and allow SIM-LESS Communication right away

➤ CalAmp


complete datasheet here

--
Spread the AVL- World
53

➤ CalAmp

Re: ➤ CalAmp

mechatronica wrote:

Dear Evgeny

Here is a Calamp-Wialon question.  At now seems only voltage-type fuel level sensors are supported. But digital interface will provide better results and precision.  Several Wialon users want to use them, but we need to solve a simple problem.
Calamp LMU 2700 uses RS232 port for Text messaging. We have built a special firmware for Calamp and now LMU device receive volume value and send to Wialon. But in text field as "user_msg_1" parameter

Any chance to convert them to sensor value, for example : from "554" to 554?

Thanks!


EDIT : Now digital fuel level sensors are working with Calamp via RS232 interface

Hi

I have 1 Omnicomm 30160 Digital Fuel Level Sensor  can this work  with LMU devices?

Also: i have a Basic developed script that can works with Wialon with events like:

Ignition On

Ignition Of

External Battery Level

Internal Battery Level

Safe engine shutdown  (with comands included and events reported) (The device will only stop the engine if the unit is less than 15 kilometers per hour

Panic Button

Periodic Report with ignition Off

Periodic Report with External Battery removed.

Any Question PM.

Regards

54

➤ CalAmp

Re: ➤ CalAmp

Cesar Luis wrote:
mechatronica wrote:

Dear Evgeny

Here is a Calamp-Wialon question.  At now seems only voltage-type fuel level sensors are supported. But digital interface will provide better results and precision.  Several Wialon users want to use them, but we need to solve a simple problem.
Calamp LMU 2700 uses RS232 port for Text messaging. We have built a special firmware for Calamp and now LMU device receive volume value and send to Wialon. But in text field as "user_msg_1" parameter

Any chance to convert them to sensor value, for example : from "554" to 554?

Thanks!


EDIT : Now digital fuel level sensors are working with Calamp via RS232 interface

Hi

I have 1 Omnicomm 30160 Digital Fuel Level Sensor  can this work  with LMU devices?

Also: i have a Basic developed script that can works with Wialon with events like:

Ignition On

Ignition Of

External Battery Level

Internal Battery Level

Safe engine shutdown  (with comands included and events reported) (The device will only stop the engine if the unit is less than 15 kilometers per hour

Panic Button

Periodic Report with ignition Off

Periodic Report with External Battery removed.

Any Question PM.

Regards


Dear Cesar

Calamp can work with digital fuel level sensors via rs232 interface but most likely you will need to buy extra UART - RS232 interface , because Calamp serial interface has UART levels, while all fuel level sensors comply full RS232.

Датчики расхода и уровня топлива, системы бортового взвешивания, контроля температуры и другое оборудование для телематики
Manufacturer of fuel level/consumption sensors, onboard weighing, temperature sensors, displays.... etc.
mechatronics.by        facebook.com/mexatronika     instagram.com/mechatronics_belarus    youtube.com/c/MechatronicsTV
55

➤ CalAmp

Re: ➤ CalAmp

Hello All,
My name is Paul from Indonesia. I am a new users of wialon. I use LMU 2720 device. This devices i bought with running configuration on it. I just change the inboud IP to make it pointing to wialon. I have some problem. So everytime the device goes  to basement it always sent last fix position including speed and number of sattelite.

Is there any parameter/s register that i can tune to make it sent last fix long,lat but speed =0 and number of sattelite =0, because current config give wrong monitoring info in wialon because the sattelite monitoring always give green color eventhough cirrently it is in basement (invalid gps)

56

➤ CalAmp

Re: ➤ CalAmp

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal

57

➤ CalAmp

Re: ➤ CalAmp

muthama wrote:

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal


Maybe you can write to us (hw@gurtam.com). In email please provide device models and send to us device script for checking. Thank you.

58

➤ CalAmp

Re: ➤ CalAmp

muthama wrote:

Hi everyone,

AM looking for the correct calamp Sregister or parameter to set inorder to get my calamp units showing steadily online in wialon local. What happens now is that my unit comes online for 10minutes if I run the AT command AT$APP CLEAR LOG. After 10 minutes it shows offline until I run the AT command again. Am testing these units on the bench and cannot install it I get them showing online steadily.

Kindly help.

BR,

Bilal


Set parameter 2313 (in seconds) to something between 30-180, this is the HB for keep the link with the carrier. Wialon recognize it well.

--
Spread the AVL- World
59

➤ CalAmp

Re: ➤ CalAmp

Por favor necesito la comfiguración para reportar cada 30 segundos con ign on y cada 5 minutos con ign off

small_gprs wrote:

Here is it a 15 Lines Minimalist ol' School AT script for any calamp devices

0.-AT$APP GPRS CONTEXT 0 "your_apn"    //APN
1.- AT$APP PPP USER "apn_username"                        
2.- AT$APP PPP PASSWORD "apn_pswd"                
3.- AT$APP INBOUND 193.193.165.165:port     // Port depends on LMU model, pls see  http://gurtam.com/en/hw-manufacturers/calamp                  
4.- AT$APP PARAM 262,0,30                    //Time Distance Profile 0 (Time=30 secs)
5.- AT$APP PARAM 263,0,800                    //Time Distance Profile 0  (Distance=800m )
6.- AT$APP PARAM 264,0,60                    //Time Distance Profile 0  (Heading=60є)
7.- AT$APP PARAM 265,1,900                    //Timer 1 = 15 min for reports when unit off
8.- AT$APP PARAM 512,0,3,0,0,0,7,0,0,0      // Start  time-distance profile 0 on reset  OR power up
9.- AT$APP PARAM 512,1,16,0,0,0,6,0,0,0     // When Ignition off stop actual profile running
10.-AT$APP PARAM 512,2,16,0,0,0,13,1,0,0   // When Ignition off start timer 1 ()
11.-AT$APP PARAM 512,3,18,1,0,0,1,10,0,0    // When timer ran out send report (EVcode 10) Unit off reports
12.-AT$APP PARAM 512,4,17,0,0,0,1,11,0,0     // When Time-Distance updates send report (EVcode 11) Unit on reports
13.-AT$APP PARAM 512,5,16,0,0,0,1,12,0,0     // Send EVcode 12 when Ignition Off
14.- AT$APP PARAM 512,6,15,0,0,0,1,13,0,0      // Send EVcode 13 when Ignition On

Event Codes
10 Reports when Unit is Off (parking)
11 Reports when Unit is Moving
12 Ignition Off
13 Ignition On


Hope can be useful !!

Sine Tecnologías
60

➤ CalAmp

Re: ➤ CalAmp

That AT Script can work modifying line 7 as

AT$APP PARAM 265,300


Ignition ON time was already set to 30 secs

--
Spread the AVL- World
61

➤ CalAmp

Re: ➤ CalAmp

tienes los comandos para ajustar vía SMS


sinetecnologias wrote:

Por favor necesito la comfiguración para reportar cada 30 segundos con ign on y cada 5 minutos con ign off

small_gprs wrote:

Here is it a 15 Lines Minimalist ol' School AT script for any calamp devices

0.-AT$APP GPRS CONTEXT 0 "your_apn"    //APN
1.- AT$APP PPP USER "apn_username"                        
2.- AT$APP PPP PASSWORD "apn_pswd"                
3.- AT$APP INBOUND 193.193.165.165:port     // Port depends on LMU model, pls see  http://gurtam.com/en/hw-manufacturers/calamp                  
4.- AT$APP PARAM 262,0,30                    //Time Distance Profile 0 (Time=30 secs)
5.- AT$APP PARAM 263,0,800                    //Time Distance Profile 0  (Distance=800m )
6.- AT$APP PARAM 264,0,60                    //Time Distance Profile 0  (Heading=60є)
7.- AT$APP PARAM 265,1,900                    //Timer 1 = 15 min for reports when unit off
8.- AT$APP PARAM 512,0,3,0,0,0,7,0,0,0      // Start  time-distance profile 0 on reset  OR power up
9.- AT$APP PARAM 512,1,16,0,0,0,6,0,0,0     // When Ignition off stop actual profile running
10.-AT$APP PARAM 512,2,16,0,0,0,13,1,0,0   // When Ignition off start timer 1 ()
11.-AT$APP PARAM 512,3,18,1,0,0,1,10,0,0    // When timer ran out send report (EVcode 10) Unit off reports
12.-AT$APP PARAM 512,4,17,0,0,0,1,11,0,0     // When Time-Distance updates send report (EVcode 11) Unit on reports
13.-AT$APP PARAM 512,5,16,0,0,0,1,12,0,0     // Send EVcode 12 when Ignition Off
14.- AT$APP PARAM 512,6,15,0,0,0,1,13,0,0      // Send EVcode 13 when Ignition On

Event Codes
10 Reports when Unit is Off (parking)
11 Reports when Unit is Moving
12 Ignition Off
13 Ignition On


Hope can be useful !!

Lps Trackers
62

➤ CalAmp

Re: ➤ CalAmp

SMS what for

--
Spread the AVL- World
63

➤ CalAmp

Re: ➤ CalAmp

Hi Everyone, is there a Calamp Tracker, that is 3G but also can connect to WIFI ?????????

Please your help

64

➤ CalAmp

Re: ➤ CalAmp

alan Sch wrote:

Hi Everyone, is there a Calamp Tracker, that is 3G but also can connect to WIFI ?????????

Please your help

3000 and 2000 series can helps, but no at the same time, there is the future device that has internal hotspot it is intended to provide wifi access to the passengers but NOT for reporting data to server via WIFI, instead that you can use LMU4200-Wifi part# LMU42W101 it has internal wifi modem for reporting to the sever

--
Spread the AVL- World
65

➤ CalAmp

Re: ➤ CalAmp

drop me a message if you interested in new solar based asset device ➤ CalAmp USA and México PM me or send request by mail

--
Spread the AVL- World