Bindings for tacho information by routes

hello, maybe you will find notifications unbinding useful in those cases? and same time - how the client is going to have driver data if he doesn't have i-button/dallas key reader/ whatever?

Hello!

Driver's activity information helps to control whether a driver follows the AETR standards or not.
So if customers doesn't need to control driver activity with AETR standards it's better to set up 'None' for driver activity
It's possible to sort units in the list with bound drivers, so you always can see which units with driver, so Driving, which without drivers, so drivers rest
The same sorting is possible on driver panel

Hello:

Right now you have a tool that you can read the
> driving times, stop times and working from a truck
> http://prntscr.com/ck9frz but this info is not good if the client has
> not installed any driver identification or tacho solution.
>
>     I understand you know how this tool works; briefly: DRIVING TIMES -
> truck moving / WORKING TIMES - vehicle stop with no driver attached /
> STOP TIMES
> - truck with driver stopped:
>
>     In my country, normally, drivers are the same so they do not change them and
> do not need the ibutton thing.     Tacho solution is quite difficult as
> trucks has different tacho brands, different years and it is quite
> difficult to have a 100% fleet with them installed.
>
>     How other competitors solve it? You choose: http://prntscr.com/ck9hr6 ;
> by routes, so you have then:      DRIVING TIMES - truck moving / WORKING
> TIMES -  STOP TIMES - truck stopped: of course
>
>     It is not 100% real data BUT for clients is enough.

3. How you see it should be realized in Wialon. Not "it's somehow
> >>> done
> in this system and here's a screen-shot" - it's about "I see it as a
> new tab in this report template, I see it as a button here, I see it
> as a new notification trigger, etc." This is on your techs. Side, I
> understand they will know much better than I to make it but it should
> be seen in a fast, easy way for dispatcher of the truck company: Example on another platform:
> http://prntscr.com/ck8to5

-->> as you have now is enough, you do not have to make it
> as in the image (http://prntscr.com/ck8to5 ) , I just put it to
> understand the potential other platforms have with this tool and how they solve it.
>
>     So, as I say, the way right now is shown in your platform is good but
>
>     1) it should work fine just with route calculation
>     2) it should have the rest of information the client would need : if
> you read the law it always makes calculations considering 2 weeks; in
> those two weeks you can do 2 periods of 10 hours  and 9 hours period restings :
> http://prntscr.com/ck9q6f
>
>                                      You will know how many hours can the truck drive for the
> rest of the week when have to start the rest...:
> http://prntscr.com/ck9qy0
>
>                                     And so on.
>
>                                     If it is shown here: http://prntscr.com/ck9ra5 would be
> perfect (aswell as on the other sides now is displayed, below the
> object, when you point at it in the map or control panel).
>
The idea is: I am the dispatcher, I have request of loads to
> give to a truck, let's see which trucks have free hours to give.
>
>     To be seen in the dashboard, I do not think clients are ready to work
> with this tool yet...they are starting to learn the platform....

transcribed from a email
I hope is better like this
thanks

Dear locationGPS, can you please explain your proposal  in more detail?

Thanks Geri,
Alek, tell me if there is something missing and I can explain...or maybe we can have a meeting with tech. and solve their doubtes about the explained info.
For our market is quite important.
Thanks
Regards

Hello,

Problem: This info : http://prntscr.com/ck9frz is useless unless you have the ibutton or tacho installed
solution: if you create an option to see this info by routes info it will be useful for the rest of the clients that did not installed the ibutton / tacho sollution

For what? this tool helps a lot dispatcher persons to assign the load to their trucks.

Thanks

Hello,
No, this tool only works when you have ibutton working with device, which is not the common thing.
On my explanation was desribed..

Thanks

Hello,

Correct, but my idea is to use this tool with the rest of the market that do not use the Tacho and the ibuttons.

Thanks

Correct, but works bad

it add working times + stop times, so calculation are not correct.

>     I understand you know how this tool works; briefly: DRIVING TIMES -
> truck moving / WORKING TIMES - vehicle stop with no driver attached /
> STOP TIMES
> - truck with driver stopped:

How other competitors solve it? You choose: http://prntscr.com/ck9hr6 ;
> by routes, so you have then:      DRIVING TIMES - truck moving / WORKING
> TIMES -  STOP TIMES - truck stopped: of course
>
>     It is not 100% real data BUT for clients is enough.

3. How you see it should be realized in Wialon. Not "it's somehow
> >>> done
> in this system and here's a screen-shot" - it's about "I see it as a
> new tab in this report template, I see it as a button here, I see it
> as a new notification trigger, etc." This is on your techs. Side, I
> understand they will know much better than I to make it but it should
> be seen in a fast, easy way for dispatcher of the truck company: Example on another platform:
> http://prntscr.com/ck8to5

-->> as you have now is enough, you do not have to make it
> as in the image (http://prntscr.com/ck8to5 ) , I just put it to
> understand the potential other platforms have with this tool and how they solve it.
>
>     So, as I say, the way right now is shown in your platform is good but
>
>     1) it should work fine just with route calculation
>     2) it should have the rest of information the client would need : if
> you read the law it always makes calculations considering 2 weeks; in
> those two weeks you can do 2 periods of 10 hours  and 9 hours period restings :
> http://prntscr.com/ck9q6f
>
>                                      You will know how many hours can the truck drive for the
> rest of the week when have to start the rest...:
> http://prntscr.com/ck9qy0
>
>                                     And so on.
>
>                                     If it is shown here: http://prntscr.com/ck9ra5 would be
> perfect (aswell as on the other sides now is displayed, below the
> object, when you point at it in the map or control panel).
>
The idea is: I am the dispatcher, I have request of loads to
> give to a truck, let's see which trucks have free hours to give.
>
>     To be seen in the dashboard, I do not think clients are ready to work
> with this tool yet...they are starting to learn the platform....

Hello,

what do you mean here :

Ignition ON without motion= another working

Another working ???? not sure how would be displaye but if it is not added to working (ignition ON + Moving) could work,

the way i explained I think it was correct and not dificult to define it.

Thanks