Вы не вошли. Пожалуйста, войдите или зарегистрируйтесь.
Hello everyone,
Does anyone have possibility to give me the parameters Teltonika device FM1000 OBDII.
param240=1
param8=39
param5=69
param90=0
param91=27
param106=3
param103=98
param96=10
param68=0
param6=960
param114=574
param113=173
Hello all
How can i configure Accelerometer sensor of FM1000 and FM1010 in Wialon?
i already setted in configurator of FM1000. But how can i add in Wialon?
b.chuka Sorry for the late reply
In these devices you can see parameters 253 / 254
Green driving type, Green driving value.
These messages are coming only after event is detected (for example harsh acceleration).
Hello everyone,
Does anyone have possibility to give me the parameters Teltonika device FM1000 OBDII.
param240=1
param8=39
param5=69
param90=0
param91=27
param106=3
param103=98
param96=10
param68=0
param6=960
param114=574
param113=173
Parameters should be described in your user manual, because it can be different for different firmwares. If you have no user manual, then write device IMEI and firmware version to hw@gurtam.com and we will ask teltonika for help.
Hello albu,
I have user manual, but can't find that parameters there.
http://teltonika.lt/product/fm1000-with-obdii-data/
geri пишет:Hello everyone,
Does anyone have possibility to give me the parameters Teltonika device FM1000 OBDII.
param240=1
param8=39
param5=69
param90=0
param91=27
param106=3
param103=98
param96=10
param68=0
param6=960
param114=574
param113=173Parameters should be described in your user manual, because it can be different for different firmwares. If you have no user manual, then write device IMEI and firmware version to hw@gurtam.com and we will ask teltonika for help.
geri please write your imei and firmware version to hw@gurtam.com
